Learning Goal: I’m working on a engineering question and need the explanation and answer to help me learn.
Assignment Content
1. Open the file in the question and put your name on the first page of the document.
2. On the second page, review and analyze the data pairs (A & B) shown. Determine, based upon the precontrol decision rules in the text or in (attached), specify what zone(s) each measure is in and whether the process should continue to run or be stopped/adjusted. Disregard any startup rules.
3. To help determine where each data point falls, first determine the values for specification lines and the PC lines on the last page of the Powerpoint. You may then plot the values directly on the chart or create an Excel file and paste the chart. Indicate the stop points on the chart. Make sure that the values you plot are the same as the table on page 2. Review and verify that the calculated values are correct and that your decision to run or stop the process is sound.
Precontrol 1
Download the file. (attached)
Complete the assignment, indicating the zones for each data point and the decision. Create a Precontrol chart and determine the specification limits and precontrol lines. Indicate the stop points.
You may use Excel to create the chart or plot the points directly on the PowerPoint.
